(五)Locust 参数说明

虫师 创建于 4 个月 之前

最后更新时间 2018-11-30

最时候该讲一下 locust 工具的参数了,虽然前面几节我们已经使用了不少参数,例如 “-f”“--host” 等。

Locust 参数


打开命令提示符(或Linux终端),输入 locust --help

> locust --help
Usage: locust [options] [LocustClass [LocustClass2 ... ]]

Options:
  -h, --help            show this help message and exit
  -H HOST, --host=HOST  Host to load test in the following format:
                        http://10.21.32.33
  --web-host=WEB_HOST   Host to bind the web interface to. Defaults to '' (all
                        interfaces)
  -P PORT, --port=PORT, --web-port=PORT
                        Port on which to run web host
  -f LOCUSTFILE, --locustfile=LOCUSTFILE
                        Python module file to import, e.g. '../other.py'.
                        Default: locustfile
  --csv=CSVFILEBASE, --csv-base-name=CSVFILEBASE
                        Store current request stats to files in CSV format.
  --master              Set locust to run in distributed mode with this
                        process as master
  --slave               Set locust to run in distributed mode with this
                        process as slave
  --master-host=MASTER_HOST
                        Host or IP address of locust master for distributed
                        load testing. Only used when running with --slave.
                        Defaults to 127.0.0.1.
  --master-port=MASTER_PORT
                        The port to connect to that is used by the locust
                        master for distributed load testing. Only used when
                        running with --slave. Defaults to 5557. Note that
                        slaves will also connect to the master node on this
                        port + 1.
  --master-bind-host=MASTER_BIND_HOST
                        Interfaces (hostname, ip) that locust master should
                        bind to. Only used when running with --master.
                        Defaults to * (all available interfaces).
  --master-bind-port=MASTER_BIND_PORT
                        Port that locust master should bind to. Only used when
                        running with --master. Defaults to 5557. Note that
                        Locust will also use this port + 1, so by default the
                        master node will bind to 5557 and 5558.
  --expect-slaves=EXPECT_SLAVES
                        How many slaves master should expect to connect before
                        starting the test (only when --no-web used).
  --no-web              Disable the web interface, and instead start running
                        the test immediately. Requires -c and -r to be
                        specified.
  -c NUM_CLIENTS, --clients=NUM_CLIENTS
                        Number of concurrent Locust users. Only used together
                        with --no-web
  -r HATCH_RATE, --hatch-rate=HATCH_RATE
                        The rate per second in which clients are spawned. Only
                        used together with --no-web
  -t RUN_TIME, --run-time=RUN_TIME
                        Stop after the specified amount of time, e.g. (300s,
                        20m, 3h, 1h30m, etc.). Only used together with --no-
                        web
  -L LOGLEVEL, --loglevel=LOGLEVEL
                        Choose between DEBUG/INFO/WARNING/ERROR/CRITICAL.
                        Default is INFO.
  --logfile=LOGFILE     Path to log file. If not set, log will go to
                        stdout/stderr
  --print-stats         Print stats in the console
  --only-summary        Only print the summary stats
  --no-reset-stats      Do not reset statistics once hatching has been
                        completed
  -l, --list            Show list of possible locust classes and exit
  --show-task-ratio     print table of the locust classes' task execution
                        ratio
  --show-task-ratio-json
                        print json data of the locust classes' task execution
                        ratio
  -V, --version         show program's version number and exit

参数说明:

参数 说明
-h, --help 查看帮助
-H HOST, --host=HOST 指定被测试的主机,采用以格式:http://10.21.32.33
--web-host=WEB_HOST 指定运行 Locust Web 页面的主机,默认为空 ''。
-P PORT, --port=PORT, --web-port=PORT 指定 --web-host 的端口,默认是8089
-f LOCUSTFILE, --locustfile=LOCUSTFILE 指定运行 Locust 性能测试文件,默认为: locustfile.py
--csv=CSVFILEBASE, --csv-base-name=CSVFILEBASE 以CSV格式存储当前请求测试数据。
--master Locust 分布式模式使用,当前节点为 master 节点。
--slave Locust 分布式模式使用,当前节点为 slave 节点。
--master-host=MASTER_HOST 分布式模式运行,设置 master 节点的主机或 IP 地址,只在与 --slave 节点一起运行时使用,默认为:127.0.0.1.
--master-port=MASTER_PORT 分布式模式运行, 设置 master 节点的端口号,只在与 --slave 节点一起运行时使用,默认为:5557。注意,slave 节点也将连接到这个端口+1 上的 master 节点。
--master-bind-host=MASTER_BIND_HOST Interfaces (hostname, ip) that locust master should bind to. Only used when running with --master. Defaults to * (all available interfaces).
--master-bind-port=MASTER_BIND_PORT Port that locust master should bind to. Only used when running with --master. Defaults to 5557. Note that Locust will also use this port + 1, so by default the master node will bind to 5557 and 5558.
--expect-slaves=EXPECT_SLAVES How many slaves master should expect to connect before starting the test (only when --no-web used).
--no-web no-web 模式运行测试,需要 -c 和 -r 配合使用.
-c NUM_CLIENTS, --clients=NUM_CLIENTS 指定并发用户数,作用于 --no-web 模式。
-r HATCH_RATE, --hatch-rate=HATCH_RATE 指定每秒启动的用户数,作用于 --no-web 模式。
-t RUN_TIME, --run-time=RUN_TIME 设置运行时间, 例如: (300s, 20m, 3h, 1h30m). 作用于 --no-web 模式。
-L LOGLEVEL, --loglevel=LOGLEVEL 选择 log 级别(DEBUG/INFO/WARNING/ERROR/CRITICAL). 默认是 INFO.
--logfile=LOGFILE 日志文件路径。如果没有设置,日志将去 stdout/stderr
--print-stats 在控制台中打印数据
--only-summary 只打印摘要统计
--no-reset-stats Do not reset statistics once hatching has been completed。
-l, --list 显示测试类, 配置 -f 参数使用
--show-task-ratio 打印 locust 测试类的任务执行比例,配合 -f 参数使用.
--show-task-ratio-json 以 json 格式打印 locust 测试类的任务执行比例,配合 -f 参数使用.
-V, --version 查看当前 Locust 工具的版本.

个别参数,我没用过,也太清楚其含义,暂时就不翻译了。

我要留言

暂无评论